Archive for the “20mm” Category

Aberrant has released their first special character model for Warlands.  Here he is, ready to drive his interceptor across the wasteland.

 

 

 

Comments No Comments »

One of the units I have been anxious to see some from Warlands is the scrap mech.  I built this conversion when I found out that the rules would be available in the core rulebook, long before the model was released.  I have a number of the old Mechwarrior clix mechs that were made by WizKids.  Several of them we referred to as ‘Tonkas’ because they were yellow contruction vehicles that had little use in the game.  This one was a modified forestry mech.

The conversion was really simple.  I used a hobby knife to remove the clear plastic cockpit.  I used the existing glue line so it was pretty easy.  I cleaned up the old superglue to make a smooth joint.  I looked through my bits for a pilot and discovered a Stan Johansen driver that would work.  I cut off the barrel of his pistol to make it look more like a control device.  To continue the effect, I used the built in articulation to give the mech a pose similar to the driver and then glued the joints in place.

Painting was straightforward.  Drybrushing and solid colors, varying them to provide some contrast.  I painted on details to break up the large areas of color.  I got to the driver last.  Looking down I realized that if I didn’t do something the driver would not be very visible on the gaming table so I decided to add some contrast to him.   I painted his armor to look like an old street sign and had him wear a tiger striped football helmet.   He’s hard to miss now.  I gave the model a good weathering and it’s good to go.

This guy should get me by till the actual model is released by Abberant.  As it turns out a preview was recently posted on Aberrant’s forums, so the wait won’t be much longer.

 

Comments No Comments »

In a previous post I showed a Hot Wheels car that was ready made for the post apocalyptic wasteland.  This is the completed model, ready to play.  The only modification I did was to add armor plates over the ugly rims. I’m really happy with how it turned out.

Comments No Comments »

These little guys were an impulse buy at Origins this summer.  They are made by Reaper Miniatures and are part of the Chronoscope line.  They are meant for 28mm heroic scale, but are short, about 20mm tall.  They come with a Warmachine size bases and were intended to be two to a base.  I rebased them on pennies and painted them similar to my Brigade Games 28mm invaders.  I’ve included a couple comparison shots.

Read the rest of this entry »

Comments No Comments »

During a recent walk through the toy aisle I noticed something bizarre.  Hotwheels new 2012 models include a car that has been hollowed out and had the cockpit and engine replaced by a crazy looking motorcycle.  It was a completely unrealistic toy that used two different scales on the same model.   Something in the back of my head made me look closer.  Unlike most Hotwheels cars, this one was modeled with a driver.  It occurred to me that maybe I could turn the middle part into a bike for Warlands.  I was strapped for time, so I tossed two into my buggy and went on about my business.

Read the rest of this entry »

Comments 1 Comment »

One of the highlights for me at Origins this year was the Warlands Big Bash.  I was about half an hour early for the event but that gave me some time to chat with Tony and Bryan who are both great guys.  Tony pulled out his new toys to show me.  The gyro copter and motorbikes that were recently released, along with a couple character models which were really nice.  I wasn’t allowed to take pictures so no asking. 

One of the models is based on the pin-up girl which is featured on their website.  The proportions on the model were rather generous, even more so than the source material.  Tony grinned and explained that the sculptor assured him that the size of the model’s features were based on his lady and that it was well researched.  The previously announced wasteland wanderer model was even better, and it is in my opinion the best sculpted pedestrian model for Warlands to date.  They are concentrating on character models based on the feedback from players.  Generic infantry can be found easily in this scale as plastic model kits.  Aberrant recognizes this and is concentrating on interesting flavor pieces for your war band.

More interesting than the models, Tony showed me the most recent print of the Mac’s Body Shop.  This is the section from the core rulebook that details how to customize your vehicles and what kind of gear you can put on them.  All I can say is WOW!  If you want to build it, the rules are in there.  It presents the frames and base stats for many different kinds of vehicles.  From bikes to several different sizes of cars to trucks and what have you.  You can give them weapons, engines, armor whatever you want.  The rules for how to upgrade the published cars are clarified and there are many more options, including dropped weapons.  If you want crunch and customization, it’s in there.

What about the game?  Well it was a blast.  This was originally posted as a 200 point brawl, but with the number of players that showed up, that would have been impossible to fit on the table.  They decided to reduce forces to three vehicles each.  I had brought most of my vehicles and which turned out to be a good thing when Tony and Bryan combined quickly ran out of vehicles to use. The table was full of players and cars and chaos ensued.  There was way too much going on to give a play by play, so enjoy the pictures after the jump.

Read the rest of this entry »

Comments No Comments »

This is a quick conversion made from a Jada Badge City Police Bus.  It is a pretty simple conversion that I did over the course of an evening while working on other projects.

Large or heavy cardboard packages will often have fiberglass bands that are used to hold the box together during shipping.  I keep a few pieces of this in my bits box because the texture makes for great metal plate.  As it turns out, the texture matches the texture used on the bus windows.  I cut four pieces that match the sizes of the front and side windows.  These got black primer and a drybrush of metal.

I took the bus apart to prime and repaint the plastic parts. I like to get rid of the chrome that is way too bright for a post-apocalyptic setting.  While I had it apart, I put a magnet in the top so I could attach a removable turret.  The turret came from the Warlands Rattler Gun Truck.  It got a white and black paint scheme to match the rest of the bus.

Once everything was reassembled, I touched up some of the details that were missed by the factory, then weathered everything.  I added rust colored wash, splattered it with mud and metallic scrapes, and finished with a brushing of a sand color.

Comments No Comments »

While they have had trouble with the rest of the gang, Aberrant has been able to get the Biker Boss and Bitch on the road.  It is a great model for this scale and makes a nice center piece for a bike gang.  Here he is, along with some Dark Future plastic bikes until Aberrant can finish the rest of the gang.

Comments No Comments »

Next we have one of the M2 Machines project cars that I mentioned a few posts ago.  This one has been converted up using parts from Aberrant’s Warlands Vehicle Accessory Pack and a driver from one of their buggies.   I removed the rear window and the plastic bridge connected to it to make room for the parts inside.  The back seat received the extra fuel tank and I added an armored beer cooler to the back. The front received a missile launcher carefully situated so that the hood could still be lifted.  I’m pretty happy with it and I think it will make a great addition to my desert cult gang.

A couple shots with extra lighting so you can see the inside detail a little better.

Finally, a size comparison shot for you.

Comments No Comments »

This is one of the toys I found recently.  I took it apart and used spray primer to paint all the plastic parts black.  The metal pieces got a quick dry brush of Boltgun Metal, and I touched up the tires in black.  I left the paint job on the metal body alone except for painting over the glowing power supply effect in the roof.  I gave it a wash with a dark rust color, then weathered it using a mud color followed by a dry bush of sand color.

It’s a little cartoon like, but it looks playable and I did not have to do any conversion work at all.

Comments No Comments »